Shop
Showing 424–432 of 527 resultsSorted by latest
-
90° Bends2.25″ Silicone 90° Elbow, Blue
Applications:
Joining your intake pipe to the throttle body assembly, air metering assembly, intercooler, BOV pipe, or turbo inlet/outlet.
Custom compressor, intercooler or inlet piping for turbo/supercharged car
Custom cold air intake for nonturbo car
Replacement of all factory rubber parts
High quality 3-ply or 4-ply fabric reinforced silicone
Installer can cut silicone parts down to fit with a razor
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm – 5 mm(0 reviews) -
45° Bends2.25″ Silicone 45° Elbow, Blue
45 degree bend to build or finish your intake.
Applications:
Custom compressor, intercooler or inlet piping for turbo/supercharged car
Custom cold air intake for nonturbo car
Replacement of all factory rubber parts
High quality 3-ply or 4-ply fabric reinforced silicone
Installer can cut silicone parts down to fit with a razor
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm – 5 mm(0 reviews) -
Straight Couplers2.0″ Silicone Straight Coupler, Blue
This is a regular 3″ long straight coupler for use with high pressure turbo, supercharger, or intercooler piping.
Applications:
Custom compressor, intercooler or inlet piping for turbo/supercharged car
Custom cold air intake for nonturbo car
Replacement for all factory rubber hoses
High quality 3-ply or 4-ply fabric reinforced silicone
Installer can cut silicone parts down to fit with a razor
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm – 5 mm(0 reviews) -
Straight Couplers2.0″ Silicone 2feet Straight Hose, Blue
This is a two-foot long piece of silicone hose. It can be used as a straight section of intake or cut to any length.
Applications:
Custom compressor, intercooler or inlet piping for turbo/supercharged car
Custom cold air intake for nonturbo car
Replacement of all factory rubber parts
Cut into 8 3″ sections for regular-sized couplers
High quality 3-ply or 4-ply fabric reinforced silicone
Installer can cut silicone parts down to fit with a razor
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm – 5 mm(0 reviews) -
Hump Hose Couplers2.0″ Silicone Hump Hose, Blue
Hump hoses are used to make slight adjustments when building your intake. These hoses flex up to 20 degrees for slight bends. They can also compensate for a slight misalignment of the pipes.
Applications:
Custom compressor, intercooler or inlet piping for turbo/supercharged car
Custom cold air intake for nonturbo car
Replacement for all factory rubber hoses
High quality 3-ply or 4-ply fabric reinforced silicone
Installer can cut silicone parts down to fit with a razor
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm – 5 mm(0 reviews) -
90° Bends
2.0″ Silicone 90° Elbow, Blue
Applications:
Joining your intake pipe to the throttle body assembly, air metering assembly, intercooler, BOV pipe, or turbo inlet/outlet.
Custom compressor, intercooler or inlet piping for turbo/supercharged car
Custom cold air intake for nonturbo car
Replacement of all factory rubber parts
High quality 3-ply or 4-ply fabric reinforced silicone
Installer can cut silicone parts down to fit with a razor
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm – 5 mm(0 reviews) -
45° Bends
2.0″ Silicone 45° Elbow, Blue
45 degree bend to build or finish your intake.
Applications:
Custom compressor, intercooler or inlet piping for turbo/supercharged car
Custom cold air intake for nonturbo car
Replacement of all factory rubber parts
High quality 3-ply or 4-ply fabric reinforced silicone
Installer can cut silicone parts down to fit with a razor
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm – 5 mm(0 reviews) -
Straight Couplers
1.75″ Silicone 2feet Straight Hose, Blue
This is a two-foot long piece of silicone hose. It can be used as a straight section of intake or cut to any length.
Applications:
Custom compressor, intercooler or inlet piping for turbo/supercharged car
Custom cold air intake for nonturbo car
Replacement of all factory rubber parts
Cut into 8 3″ sections for regular-sized couplers
High quality 3-ply or 4-ply fabric reinforced silicone
Installer can cut silicone parts down to fit with a razor
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm – 5 mm(0 reviews) -
Hump Hose Couplers
1.75″ Silicone Hump Hose, Blue
Hump hoses are used to make slight adjustments when building your intake. These hoses flex up to 20 degrees for slight bends. They can also compensate for a slight misalignment of the pipes.
Applications:
Custom compressor, intercooler or inlet piping for turbo/supercharged car
Custom cold air intake for nonturbo car
Replacement for all factory rubber hoses
High quality 3-ply or 4-ply fabric reinforced silicone
Installer can cut silicone parts down to fit with a razor
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm – 5 mm(0 reviews)