Turbo Parts
Showing 127–135 of 287 resultsSorted by latest
-
Straight Couplers3.25″ Silicone Straight Coupler, Blue
This is a regular 3″ long straight coupler for use with high pressure turbo, supercharger, or intercooler piping.
Applications:
Custom compressor, intercooler or inlet piping for turbo/supercharged car
Custom cold air intake for nonturbo car
Replacement for all factory rubber hoses
High quality 3-ply or 4-ply fabric reinforced silicone
Installer can cut silicone parts down to fit with a razor
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm – 5 mm(0 reviews) -
Straight Couplers2.5″ Silicone Straight Coupler, Black
This is a regular 3″ long straight coupler for use with high pressure turbo, supercharger, or intercooler piping.
Applications:
Custom compressor, intercooler or inlet piping for turbo/supercharged car
Custom cold air intake for nonturbo car
Replacement for all factory rubber hoses
High quality 3-ply or 4-ply fabric reinforced silicone
Installer can cut silicone parts down to fit with a razor
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm – 5 mm(0 reviews) -
Straight Couplers
3.5″ Silicone Straight Coupler, Black
This is a regular 3″ long straight coupler for use with high pressure turbo, supercharger, or intercooler piping.
Applications:
Custom compressor, intercooler or inlet piping for turbo/supercharged car
Custom cold air intake for nonturbo car
Replacement for all factory rubber hoses
High quality 3-ply or 4-ply fabric reinforced silicone
Installer can cut silicone parts down to fit with a razor
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm – 5 mm(0 reviews) -
Silicone ReducersSilicone Reducer, 2.25″ to 2.0″ – Red
Applications:
Joining your intake pipe to the throttle body assembly, air metering assembly, intercooler, BOV pipe, or turbo inlet/outlet.
Custom compressor, intercooler or inlet piping for turbo/supercharged car
Custom cold air intake for nonturbo car
Replacement of all factory rubber parts
High quality 3-ply or 4-ply fabric reinforced silicone
Installer can cut silicone parts down to fit with a razor
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm – 5 mm(0 reviews) -
Straight Couplers
1.5″ Silicone Straight Coupler, Blue
This is a regular 3″ long straight coupler for use with high pressure turbo, supercharger, or intercooler piping.
Applications:
Custom compressor, intercooler or inlet piping for turbo/supercharged car
Custom cold air intake for nonturbo car
Replacement for all factory rubber hoses
High quality 3-ply or 4-ply fabric reinforced silicone
Installer can cut silicone parts down to fit with a razor
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm – 5 mm(0 reviews) -
Bending Reducers
Silicone Reducer, 45° bend – 3.0″ to 2.0″ – Black
Applications:
Joining your intake pipe to the throttle body assembly, air metering assembly, intercooler, BOV pipe, or turbo inlet/outlet.
Custom compressor, intercooler or inlet piping for turbo/supercharged car
Custom cold air intake for nonturbo car
Replacement of all factory rubber parts
High quality 3-ply or 4-ply fabric reinforced silicone
Installer can cut silicone parts down to fit with a razor
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm – 5 mm(0 reviews) -
T-Bolt ClampsT-Bolt Clamp for 3.5″ Silicone Parts
These Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling.
Unlike some other t-bolt clamps available, these are not marked with any company logo. The only marking is a small, convenient number telling you the clamping ability (in MM). The measurement system we use is designed for 3 or 4-ply silicone coupling.
Actual clamping ability is 3.62″ to 3.94″.
These clamps are smooth on the inside and will not bite into silicone like worm gear clamps.
Clamping ability is over 20 times greater than worm gear clamps.
Bolt is easy to tighten since it is out away from the clamping surface.
Clean, shiny, and professional looking – show quality clamps.
Do not get dirty as easily as worm gear clamps, and are easier to clean.(0 reviews) -
T-Bolt Clamps
T-Bolt Clamp for 3.25″ Silicone Parts
These Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling.
Unlike some other t-bolt clamps available, these are not marked with any company logo. The only marking is a small, convenient number telling you the clamping ability (in MM). The measurement system we use is designed for 3 or 4-ply silicone coupling.
Actual clamping ability is 3.34″ to 3.73″.
These clamps are smooth on the inside and will not bite into silicone like worm gear clamps.
Clamping ability is over 20 times greater than worm gear clamps.
Bolt is easy to tighten since it is out away from the clamping surface.
Clean, shiny, and professional looking – show quality clamps.
Do not get dirty as easily as worm gear clamps, and are easier to clean.(0 reviews) -
T-Bolt Clamps
T-Bolt Clamp for 3.0″ Silicone Parts
These Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling.
Unlike some other t-bolt clamps available, these are not marked with any company logo. The only marking is a small, convenient number telling you the clamping ability (in MM). The measurement system we use is designed for 3 or 4-ply silicone coupling.
Actual clamping ability is 3.11″ to 3.43″.
These clamps are smooth on the inside and will not bite into silicone like worm gear clamps.
Clamping ability is over 20 times greater than worm gear clamps.
Bolt is easy to tighten since it is out away from the clamping surface.
Clean, shiny, and professional looking – show quality clamps.
Do not get dirty as easily as worm gear clamps, and are easier to clean.(0 reviews)